Industrial Processes

Stubbe (Steubbe) Vertical Pump - ETLB-S

• vertical single-stage immersion pump in block design
• equipped with a freewheeling shaft for protection against dry running
• broad range of applications through diverse construction and material combinations
• excellent operating reliability even under extreme operating conditions
• high availability due to simple modular design in the immersion depths 275/295, 375/395, 475/495
• special mounting plate and connection designs available on request
• equipped with a freewheeling shaft for protection against dry running
• Impeller fastened on the motor shaft independent of the rotational direction
• Screwless plastic spiral housing made of PP or PVDF
• Three-phase motor manufactured by STUBBE
• Corrosion protection through 2-component protective paint

With RITMO EASY LIFE it is possible to Butt weld fittings such as elbows, tees, wyes and stub ends. This is possible because the 3rd clamp can be anchored to the 1st and 2nd (movable) and slide along with the pipe. The fitting have to be locked in the 4th clamp. Short neck stub ends can be welded with the help of a special tool (on request).

Thanks to a special gearcase  the EASY LIFE is able to manage the welding process in a semi-automatic way from OD 40 to 630 mm.

The electronic system guarantees the continuous repeat of the welding cycles and automatic control of the preset parameters, therefore the operator needs only to validate the welding phases. The user-friendly graphic display allows a quick setting of the desired parameters. 

The EASY LIFE system can store up to 4000 welding cycles and sum them up into a PDF file. This report can be transferred to a PC/laptop through a USB port.  
Possibility to pre-set 50 customized.
The EASY LIFE system data-logging now shows the time! 

SIMONA® PE 100 AP-Line plastics pipes and fittings with integrated wear-resistant interior skin are an excellent choice for pneumatic and hydraulic transport of solid waste. Thanks to their superior properties, they are used wherever high mechanical loads act on the interior of the piping systems.

During hydraulic and pneumatic transport of solid materials the pipe interiors are subjected to substantial mechanical stresses caused by water/air-solid mixtures that leave material deposits on the interior of the pipe during transport.

SIMONA® PE 100 AP-Line Pipes have a much longer service life and can withstand greater loads than solid wall PE 100 and conventional steel and GFRP pipes. They are therefore especially suitable for conveying granular materials like sand and coal sludge or ores.

SIMONA® PP-H AlphaPlus® is a homopolymeric polypropylene (PP-H) featuring a specially modified formula that makes it the perfect choice for applications within the area of industrial tank and plant engineering.